Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gas fireplace service
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Everett
Chimney repair in Everett typically runs from $850 for targeted mortar repointing up to $6,500 for partial rebuilding of a shared triple-decker stack, with most jobs scheduled within 3-5 business days. Our crews are in Everett regularly, dispatched from our Boston office, and we know the city’s 1890-1930 triple-deckers well enough to spot the dead-flue backdrafting pattern that’s almost standard here. Call us at (857) 309-1908 for a written estimate before any work starts.
We’ve been documenting Everett chimneys with camera-scan inspections since 2009. That’s not a marketing claim; it’s Haven Standard Clause 4, and it means every customer gets a photo record they can reference when they sell, when their insurer asks, or when a neighboring unit’s flue starts affecting their own. Everett’s housing stock demands this level of documentation because a single shared stack can hide problems that no flashlight inspection from the roofline will catch.
Why Level Two Chimney Cambridge Is Everett’s Preferred Chimney Repair Company
Our reputation in Everett was built on triple-deckers. We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a disproportionate share of our repair calls come from Everett’s dense grid of two- and three-family homes where one stack serves multiple units with flues that were never properly resized after coal conversion. Homeowners here leave reviews mentioning the same thing: the technician showed them the camera footage, named the problem in plain terms, and handed them a written price before suggesting any work.
Response time to Everett averages 3-5 days for standard repairs, though we always answer live when you call. Our Boston office coordinates scheduling, and because we’re in Everett multiple times per week, we can often batch inspections on the same block. Background-checked, uniformed technicians carry license information on every page of their documentation, and you’ll get a text when your tech is en route.
Local knowledge matters here in a way it doesn’t in newer suburbs. We know that a chimney on Elm Street near the Mystic River faces different moisture loading than one on the hillside toward Glendale Park. We know that many Everett triple-deckers along Broadway still vent high-efficiency appliances into flues sized for coal furnaces. And we know that the worst repair recommendations in this market happen when a company inspects one flue in a shared stack without checking what the adjacent units are venting. Our Chimney Repair team won’t do that.
Our Chimney Repair Services in Everett
Mortar Repointing & Tuckpointing
Everett’s freeze-thaw cycles are brutal on mortar joints that haven’t been touched in decades. A typical repointing job on a triple-decker stack runs $1,200-$2,800 depending on access and how many courses need grinding out. We use Type N or Type O mortar matched to the existing hardness, not the quick-setting bag mix that’ll crack again in two winters. On a recent job near Ferry Street, we found the front facade pointing was sound but the rear, windward face had lost 40% of its bed joints to spalling - the kind of directional damage you only see in coastal-exposed Everett chimneys.
Spalling Brick Repair & Crown Rebuild
Spalling - the flaking and popping of brick faces - is what happens when water gets in, freezes, and pushes the face off. In Everett, this concentrates on chimney crowns that were never properly capped or were capped with poured concrete that cracked along the flue line. Crown rebuilds with proper slope and drip edge run $950-$1,800. If the spalling has reached the wythes below the crown, we’ll document it on camera and show you exactly how deep the damage goes before we quote brick replacement.
Chimney Waterproofing
Everett’s Mystic River proximity means ambient moisture is a year-round factor, not just a spring problem. Waterproofing a triple-decker chimney with a silane/siloxane breathable sealer runs $650-$1,100 and carries a 10-year manufacturer’s warranty through our Haven buying network. We source materials from Copperfield and Famco specifically for this climate. Waterproofing won’t fix existing leaks, but on sound masonry with intact pointing, it’s the difference between repointing every 8-10 years versus every 20.
Flashing Repair & Replacement
Step flashing and counterflashing on Everett’s low-slope triple-decker roofs take a beating from ice damming and wind-driven rain. A typical flashing repair where we’re reworking existing metal runs $450-$850; full replacement with custom-fabricated copper or lead-coated copper runs $1,100-$2,200. We always inspect the roof deck and sheathing while we’re there - water that got past the flashing often traveled laterally along the rafter bay before it showed inside.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Everett
We stock repair materials from DuraFlex, HeatShield, and Famco through our Haven buying network, which means we’re not marking up special-order parts or making you wait two weeks for a liner kit. For Everett’s triple-decker rebuilds, we keep HeatShield cerfractory mix and DuraFlex relining kits on the truck because we use them weekly. When we quote a job, the material spec is written into the scope - you’ll know whether you’re getting a stainless DuraFlex liner or a HeatShield resurfacing before we start, and you’ll see the manufacturer’s documentation when we’re done.
Common Chimney Repair Problems We See in Everett Homes
- Shared-stack flue cross-contamination. One unit’s abandoned flue becomes a pathway for another unit’s exhaust. We’ve found CO readings in “dead” flues that exceeded active flue levels. Only a Level 2 camera scan of every flue in the stack catches this.
- Nor’easter-driven freeze-thaw mortar failure. Everett’s coastal position means every winter storm delivers freeze-thaw cycles that inland suburbs avoid. Mortar that lasted 60 years in Winchester fails in 25 here.
- Oversized flues venting modern appliances. A flue built for a coal furnace is often 8″×12″ or larger. Venting a modern 80% furnace into that space causes condensation, corrosion, and liner failure. The camera shows the damage; the written quote names the fix.
- Mystic River moisture accelerating efflorescence. That white powder on your brick is salt migration from water moving through the masonry. It means water is getting in somewhere, and in Everett, it’s usually crown cracks combined with failed pointing on the river-facing side.
Pricing for Chimney Repair in Everett, MA
| Service | Typical Range in Everett |
|---|---|
| Targeted mortar repointing (局部) | $850 - $1,800 |
| Full-course tuckpointing, triple-decker stack | $2,200 - $4,500 |
| Chimney crown rebuild with proper slope | $950 - $1,800 |
| Spalled brick replacement (per course) | $400 - $750 |
| Waterproofing treatment | $650 - $1,100 |
| Flashing repair/replacement | $450 - $2,200 |
| Partial chimney rebuild (above roofline) | $3,500 - $6,500 |
| HeatShield liner resurfacing | $2,800 - $4,200 |
What moves a job to the high end of the range: access difficulty on tight Everett lots, hidden structural damage the camera reveals once we’re inside, and the need to coordinate with multiple unit owners in a shared stack. What keeps it at the low end: catching it early, before spalling reaches the wythes or the liner fails completely. Every estimate is free, written, and delivered before work starts - Haven Standard Clause 1. No exceptions.
We Also Serve Cities Near Everett
Our Chimney Repair in Everett crews also work in Boston, Cambridge, Winchester, and Wakefield. The housing stock changes as you move outward - Winchester’s single-family colonials present different flue sizing issues than Everett’s triple-deckers - but our inspection standard doesn’t. Every job gets the same Level 2 camera scan, written price, and documented photo record.
Serving Everett, MA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Everett
Yes, and more importantly, each flue must be camera-scanned in a single session so the technician can see how they interact. A dead flue in Unit 1 can backdraft Unit 2’s exhaust, and you won’t know unless all three are inspected together. We coordinate with tenants or owners when needed, and we document the full stack under Haven Standard Clause 4. Call (857) 309-1908 to schedule - estimates are free.
You can’t, visually. Hairline cracks in clay tile are invisible from the firebox and often invisible from the roof. A Level 2 inspection lowers a camera the full length of the flue; we document every joint, every crack, every missing tile. On Everett’s shared stacks, we also check whether the adjacent flue’s condition is affecting yours. We show you the footage before we quote any repair.
It’s common, but “normal” doesn’t mean safe. Those abandoned flues were often left open at the top, capped poorly, or repurposed as chase space for wiring - any of which creates a pathway for moisture, pests, or exhaust from active flues. We inspect abandoned flues as standard; if they’re sound but unused, we cap them properly. If they’re deteriorating, we document it and quote the fix.
Yes, and it’s one of the most common hazardous conditions we find in Everett triple-deckers. When one appliance creates stronger draft than another, the weaker one can reverse, pulling exhaust into the living space. The field vignette: On a two-family on Bucknam Street, our tech ran a Level 2 inspection camera up a shared stack and found the ground-floor flue dead-ended with a crumbling clay-tile liner, while the upper unit’s oil boiler was drafting into that abandoned flue and pulling exhaust back into the basement. We documented the cracked tile on camera for the owner, then installed a HeatShield liner in the active flue and fitted a proper cap on the inactive one - the CO readings at the boiler dropped to normal. Only a camera inspection of the full stack reveals this.
A cap protects the flue opening; waterproofing protects the masonry itself. In Everett, with Mystic River moisture and nor’easter-driven rain, we’ve seen well-capped chimneys with saturated brick walls because the pointing was porous. If your cap is sound but you’re seeing efflorescence or interior dampness, the masonry needs sealing. We test absorption rates before recommending it - no charge for the assessment.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Everett and the greater Boston area since 2009.